ProEquip Pressurised Sand Blaster 20 Gallon (75L)

Description

PE3015 – Pressurised Sand Blaster 75L Great for fast removal of surface rust paint dirt/grease etc. • Heavy duty steel construction. • Pressurised design gives greater power than siphon equivalent. • Facility to control the sand and the outlet flow. • Safety shut-off valve. • Includes regulator & pressure gauge Specifications: • 75L (10 Gal) Capacity • Includes Safety Mask Thread Tape and Sand Funnel • 4 Ceramic Nozzle Tips – 2.5 3.0 4.0 & 4.5mm • Working Pressure – 4.4 – 8.6bar (65 – 125psi) • CFM (air flow required) – 6 to 19 @ 125 psi (Dependent on tip size) • Sand Use – 27-90kg @ 125psi per hour (Dependent on tip size) • Hose Length – 3m (10ft) • Tank Dimensions – 381(Ø) x 610mm • Net Weight – 25kg WARNING – Do Not Operate Over 125 psi IMPORTANT – A compressor capable of supplying air at a rate of 6-19CFM is required (minimum 3.0HP). Spare Tip Set Order Code: TQ3008/1 Replacement Gun Order Code: TQ3008/2 Replacement Hose Order Code: TQ3008/4 *12 Month Limited Warranty against faulty materials and manufacture defects only*