3M 2135 P2/P3 PARTICULATE FILTER

Description

Provides protection against: Particulates (P2/P3*). * Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator.

Protection Factors: Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels. This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: – With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) – With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES

• Common Applications/Hazards: For protection against toxic particles such as asbestos (refer to local government guidelines). Also for mould remediation and Beryllium
• Made from 3M high performance filter media for effective filtration efficiency
• Lightweight and provides low breathing resistance
• 3M™ Bayonet Connection System ensures precise and secure locking
• Low profile and well balanced twin filter design
• Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series