METABO SBEV 1300-2 S IMPACT DRILL
$812.82 incl. GST
- Description
- Specifications
Description
METABO IMPACT DRILL 1300 W MARATHON MOTOR SAFETY CLUTCH (600786500)
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
- Thumbwheel for Speed Preselection
- Selectable “impuls” mode for removal of stubborn screws and for spot-drilling on smooth surfaces
- Robust die cast aluminium gear housing for optimum heat dissipation and long service life
- Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
- Metabo Marathon-motor with dust protection for long service life
- Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly
- Forward and reverse rotation
- Keyless chuck and spindle stop gear for convenient one-handed tool change
- Spindle with hexagonal recess for screwdriver bits for working without chuck
- Overload protection: protects the motor from overheating
- Restart protection: prevents unintentional start-up after power supply interruption
- Cable-protecting ball joint for optimal freedom of motion when working
- Wear Indication for Carbon Brush
- With metaBOX, the intelligent solution for transport and storage
SCOPE OF DELIVERY:
- Futuro Plus keyless chuck
- rubber-coated side handle
- Drilling depth guide
- metaBOX 145 L
Characteristics:
| Rated input power | 1300 W | |
| Output power | 730 W | |
| Maximum torque | 44 / 16 Nm | |
| Drill-Ø masonry |
24 mm
|
|
| Drill-Ø concrete | 22 mm | |
| Drill Ø steel | 16 / 10 mm | |
| Drill-Ø soft wood | 40 / 25 mm | |
| No-load speed | 0 – 1100 / 0 – 3100 rpm | |
| Revolutions at rated load | 1100 / 3100 rpm | |
| Maximum impact rate |
58900 bpm
|
|
| Gears | 2 | |
| Chuck capacity | 1.5 – 13 mm | |
| Collar diameter | 43 mm | |
| Drill spindle with hexagonal recess | 6.35 mm | |
| Drill spindle thread | 1/2 ” – 20 UNF | |
| Chuck clamping type | Keyless chuck | |
| Weight (without power cable) | 2.8 kg | |
| Cable length | 4 m |
Vibration:
|
Drilling in metal
|
4.2 m/s² | |
|
Uncertainty of measurement K
|
1.5 m/s² | |
|
Hammer drilling concrete
|
17.5 m/s² | |
|
Uncertainty of measurement K
|
1.5 m/s² |
Noise emission:
|
Sound pressure level
|
103 dB(A) | |
|
Sound power level (LwA)
|
114 dB(A)
|
|
|
Uncertainty of measurement K
|
3 dB(A)
|
