GEARWRENCH 27 Piece Punch and Chisel Set

Description

The GEARWRENCH 27-piece punch and chisel set includes: 8 cold chisels, 3 center punches, 6 pin punches, 4 long taper (drift) punches, 6 starter punches, and a cloth tool roll for storage. Use these cold chisels for cutting metal rivets, bolts, and nuts. Use the pin punch to drive out pins and rivets during final removal. The center punch is used for marking center lines, and pilot drill locations, while long taper punches are used to install and remove pins and shafts and to align holes. Use starter punches for both starting and installing pins and rivets.

Features

• Precision hardened chisels for cutting metal rivets, bolts, and nuts
• Pin punches for driving out pins and rivets during final removal
• Center punches for marking center lines or pilot drill locations
• Long taper punch lets you install or remove pins and shafts, and aligns holes with ease
• Starter punches for both starting and installing pins or rivets
• Includes tool roll for storage and organization

Contains

82261 – 1/4″ x 4-3/4″ Cold Chisel
82262 – 3/8″ x 5″ Cold Chisel
82263 – 7/16″ x 5-1/2″ Cold Chisel
82264 – 1/2″ x 6″ Cold Chisel
82265 – 5/8″ x 6-1/2″ Cold Chisel
82266 – 3/4″ x 7″ Cold Chisel
82267 – 7/8″ x 7-1/2″ Cold Chisel
82268 – 1″ x 8″ Cold Chisel
82269 – 1/4″ x 4-1/4″ Center Punch
82270 – 3/8″ x 5″ Center Punch
82271 – 1/4″ x 5-1/2″ Center Punch
82272 – 3/32″ x 4-3/4″ Pin Punch
82273 – 1/8″ x 5″ Pin Punch
82274 – 5/32″ x 5-1/4″ Pin Punch
82275 – 3/16″ x 5-1/2″ Pin Punch
82276 – 1/4″ x 7″ Pin Punch
82277 – 5/16″ x 7″ Pin Punch
82278 – 1/8″ x 8″ Long Taper Punch
82279 – 5/32″ x 8-1/2″ Long Taper Punch
82280 – 3/16″ x 9″ Long Taper Punch
82281 – 1/4″ x 11″ Long Taper Punch
82282 – 5/32″ x 5″ Starter Punch
82283 – 3/16″ x 5″ Starter Punch
82284 – 1/4″ x 6″ Starter Punch
82285 – 1/8″ x 4-1/2″ Starter Punch
82286 – 5/16″ x 7″ Starter Punch
82287 – 3/8″ x 8″ Starter Punch