3M 2138 GP2/GP3 PARTICULATE FILTER

Description

Provides protection against: Particulates (P2/P3*), Ozone and Nuisance Level** Acid Gas & Organic Vapours with Low Vapour Pressure. * Higher P3 protection factors only achieved with a 3M Full Face Respirator, otherwise P2 protection level when worn on a 3M Half Face Respirator. **Nuisance Levels are those levels below the Workplace Exposure Standard (WES).

Protection Factors: Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels. This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: – With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) – With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 100 x WES – Organic compounds with low vapour pressures – Ozone up to 10 x WES – Offers relief from acid gases and organic vapours at levels below the WES

• Common Applications/Hazards: For protection against toxic particles such as mould remediation. Also for nuisance level* acid gases and organic vapours with low vapour pressure
• Made from 3M high performance filter media for effective filtration efficiency
• Lightweight and provides low breathing resistance
• Suitable for use with 3M™ Half Face Respirators 6000 / 6500QL / 7500 Series and 3M™ Full Face Respirators 6000 Series