HiKOKI DH52MEY(G1Z) 52mm 1500W SDS-MAX Brushless Rotary Hammer
$1,972.02 incl. GST
Industry first AC Brushless Motor. Unique Maintenance-free Brushless motor provides significantly longer life. No carbon brush replacement required. None of the traditional problems from conventional brushed commutator motors.
- Industry first AC Brushless Motor. Unique Maintenance-free Brushless motor provides significantly longer life. No carbon brush replacement required. None of the traditional problems from conventional brushed commutator motors
- Stable Performance under voltage drop situations. Unlike conventional electric Rotary hammers, drilling performance isn’t affected as much by voltage drop from long extension leads on site.
- Stable Performance when used with Generators. Brushless design operates consistently and without the traditional problems cause by generator use. Requires suitably sized Generator output.
- Fastest Drill speed in its class – Up to 20% faster*
- Highest Demolition Performance in its class – Up to 30% high performance*
- Ultra low vibration due to Hitachi’s original, spring-type dynamic vibration absorber & vibration absorbing side-handle – Approx. 26% lower vibration value*
- Hitachi’s original, pendulum dynamic vibration absorber reduces the vibration by moving a weight and a leaf spring in the opposite direction to the movement of the hammer.
- Aluminium Housing Body (AHB) provides a super strong aluminium die-cast body with internal double-insulation making the housing more rigid, significantly enhancing durability of the motor unit.
- Improved handling with constant speed control & 4-stage electronic switching to adjust the drilling speed and impact rate
- Continuous operation function (Hammer only Mode) – keeps the tool running even after the trigger switch is released, making chiselling easier.
- One-touch quick change SDS MAX chuck
- Large change lever & trigger switch – easy to operate wearing gloves
- 2-mode – Hammer only and Hammer Drilling
- Variable lock mechanism allows 12 different chisel angles (hammer only)
- *A comparison of the model DH40MEY(G1) and the previous model DH40MRY. The results may vary depending on operating conditions.
|Capacity||Masonry||52mm (drill bit)|
|106mm (core bit)|
|Bit Shank||SDS MAX|
|No Load Speed||110 – 280/min|
|Full Load Impact Rate||1,000 – 2,400/min|
|Impact Energy Per Stroke||22.0 Joules|
|Vibration Total Values (triax vector sum)||Hammer drilling into concrete||Vibration emission value : ah, HD = 9.8m/s2 Uncertainty K = 1.5 m/s2|
|Equivalent chiselling value||Vibration emission value : ah, CHeq = 9.7m/s2 Uncertainty K = 1.5m/s2|
|Standard Accessories||Side handle|
|(Supplied without pictured drill bit)|
|(The tri-axial vibration values were measured according to EN60745-2-6)|